Note: This guide is for those who cannot use our Cloud Cover Music Set up app, or need to manually configure a connect your CloudBox to Wifi. For more about the set up app, please go here:

To start, confirm your CloudBox model. Locate the white sticker on the top of the unit and check the model code. If it’s G9CX1 through G9CX12, this guide applies. If not, select your CloudBox model below to view the WiFi setup instructions.

2. Next, plug the HDMI cable into the CloudBox and the monitor.

If you are using a TRRS cable provided with the CloudBox, connect the 3.5mm input to the CloudBox and the red, white and yellow inputs into corresponding plugs on the monitor.

3. The Cloud Cover Music screen will display on the monitor.

​ 4. Right-click the mouse anywhere on the screen to exit out of the Cloud Cover Music screen and open the main menu for the CloudBox.

2. Select Networks

3. Select Wireless network

4. Click at the top of the Wireless network switch screen to change status to < Open >

5. Select your wireless network

6. Enter your network information

7. Select Connect
8. Right-click the mouse until you return to the main menu
9. Select the Cloud Cover Music App

10. Look for album art to confirm music begins streaming.
​

11. Once the CloudBox is connected to the Wifi, you can install it anywhere in your business.

CloudBoxes support the following wireless authentication:

Please note: Wired ethernet connections are more reliable than wifi, therefore we would recommend wired over wifi. In the case of power failure the Cloudbox will save the SSID/Password for your network and automatically reconnect when power is returned.