If you're using an amplifier that accepts an RCA input you can follow these instructions on our generic CloudBox Setup Diagram

However, If your Amplifier Requires a Terminal Input you can use the existing cable you're using with your Mood Media Provision IO in conjunction with a Female stereo RCA to female mono RCA audio coupler and the cable we provide.

Steps

  1. Pull the audio cable out from the Mood Media Provision IO Output

  2. Connect the Provision IO output cable still connected to your amp to the single mono side of the RCA Coupler

  3. Connect the Cable that came with the Cloudbox to the output of the Cloudbox.

  4. Connect the red and white connectors on the Cloudbox to the stereo side of the coupler (the side with two female inputs).

Note:

The yellow connector from the Cloudbox is a video feed and won't be connected to anything. If you haven't already please take the Ethernet cable out of the provision IO and plug it into the Ethernet input on the Cloudbox

Did this answer your question?